Laissez un message
Laissez un message
Si nos produits vous intéressent et que vous souhaitez en savoir plus, veuillez laisser un message ici, nous vous répondrons dans les plus brefs délais.
soumettre
Pigments à effets spéciaux
Maison Pigments à effets spéciaux

Aluminum Pigment: Face-Safe Powder and Mirror Silver Paste

Aluminum Pigment: Face-Safe Powder and Mirror Silver Paste

Dry powder listed for face and eye-area use, plus mirror silver paste in solvent, water and holographic grades. Confirm market and shipping class first.

  • Numéro d'article :

    Aluminum Pigment Powders; Aluminum Silver Paste
  • Effet de couleur :

    Fine Silver, Metallic Silver, Shine Silver, Glitter Metallic Silver, Olive Green, Dragon Gold, Shine Flame Red, plus mirror silver and holographic pastes
  • Taille des particules :

    Powder 15–145 μm; paste 8–35 μm
  • Composition :

    Aluminum flake; paste grades are the same flake pre-dispersed in a solvent or a passivated water carrier
  • Marque :

    Kolortek / OEM
  • MOQ :

    Confirmed per form and destination port
  • Application :

    Coatings, printing inks, nail systems, plastics and decorative finishes

Aluminum pigment leaves us in one of two containers, and the container decides more than the colour does. Dry powder is listed for face and eye-area use and ships as general goods. Silver paste is a liquid, classified as dangerous goods. Settle those two points against your market and your forwarder before you compare shades.

Before you compare shades
Powder: face and eye-area listing, general goods.
Paste: dangerous goods, released only after the documentation check.
Waterborne paste: passivated, and not a drop-in for the solvent grade.

What Actually Ships: Dry Powder or Wet Paste

The same metal is supplied in two forms. What differs is what the flake is packed in, and that affects how each form is handled and shipped.

Property Dry powder Silver paste
Physical form Dry powder Flake held in a liquid carrier
Listed for Face and eye-area use Nail use at the fine end; industrial coatings and printing
Particle size 15–145 μm 8–35 μm
Transport General goods Dangerous goods; sample and shipment release confirmed with our documentation team first
Shear Dry blending and low-shear dispersion Low shear; holographic flake can lose its pattern under excessive shear

The powder range covers 15–45, 35–55, 35–75, 55–75 and 55–145 μm. Paste sizes are 8, 10, 12, 20 and 35 μm. These ranges describe the available particle sizes; which one suits a job depends on its application and finish.

Two buyers asking for the same colour may therefore need different checks before shipment. The form determines whether the dangerous-goods confirmation applies.

Aluminum pigment powder range in piles with clear sampling jars

Fig. 1 — Powder range with the sampling jars it is despatched in.

Dry aluminum powder beside the same metal dispersed into silver paste

Fig. 2 — The same metal twice: dry powder, and the paste it becomes once wet out.

The Two Questions That Come Before Colour

Colour is the third question. Two come first, and a no to either one ends the discussion before shading is reached.

The first is market access: can this form be listed in the market you sell into? The powder range is listed for face and eye-area use. The finest paste grades are listed for nail use, and the paste also serves industrial coatings and printing. If your product touches skin near the eyes, that distinction helps determine which form to consider.

The second is logistics: can this form reach your factory? The paste is classified as dangerous goods, and sample and shipment release are confirmed with our documentation team first. This is the point buyers most often meet after a price has been agreed: the forwarder still needs to be considered. Ask early, with a destination port in mind, so the shipping route can be checked.

Both questions have the same shape. They are yes or no, they are settled before colour, and a no on either means the rest of this page belongs to someone else's process.

If the paste is headed for an industrial coating rather than a nail or print job, the wider context is our pigments for paints and coatings range.

And if the finish you actually want is a pearlescent metallic look rather than true metal flake, this is the fork: metal luster series.

Close view of fine silver aluminum pigment powder surface

Fig. 3 — The silver face of the dry powder, close in.

Where aluminum powder and silver paste diverge on market listing and transport class

Fig. 4 — Where powder and paste diverge on market listing and transport class.

Where the Paste Splits by Carrier

The paste is not one product in several colours. It splits by what carries the flake, and the carrier helps determine which application it belongs in.

Paste Carrier and effect Where it belongs
Nail, fine particle Finest cut, mirror face Nail systems
Solvent type Solvent carrier, standard mirror Coatings and printing that already run solvent
Waterborne Water carrier, passivated surface Systems that must be water-based
Holographic, solvent Embossed diffraction pattern, solvent carrier Accent effects in solvent systems
Holographic, waterborne Embossed pattern, passivated, water carrier Accent effects in water-based systems

Waterborne is not the solvent grade with the solvent swapped out. Aluminum reacts with water and gives off hydrogen, so untreated flake will do exactly that in a water-based binder. The waterborne grades are passivated at the surface to limit it. Treat the waterborne paste as a different material, not a substitution.

The holographic grades work by a different mechanism again. The diffraction pattern is embossed onto the flake rather than carried as a dye, so shear is not only a dispersion question for them — it is an appearance question.

Choosing between them is therefore a question about your system rather than about the effect. The binder, the film weight and the substrate all narrow the carrier before colour is reached, which is why a colour name on its own rarely identifies the right paste.

The fine-particle paste is listed for nail work — pigments for nail art.

Aluminum silver paste being poured over test parts before cure

Fig. 5 — Paste poured over test parts: the form you can meter into a batch.

Mirror silver and gold aluminum pigment finishes on shaped sample parts

Fig. 6 — Mirror silver and gold reading on curved parts.

Mirror silver paste split by carrier into nail, solvent, water and holographic paste

Fig. 7 — The paste split by carrier, and what each carrier rules in or out.

Mixing Rules That Change With the Form

Powder can be dry blended or dispersed at low shear. Keep the flakes intact during dispersion.

Paste goes in last, and is thinned first. Dilute it in a portion of the carrier before adding it to the main batch, then stir at low shear. Adding it last reduces its contact with water and with reactive components in the batch.

Apply thin coats in several passes rather than one heavy coat.

Holographic grades are shear-sensitive for the reason above. Low shear, added last, and no ball milling if you want the pattern back on the finished surface.

If you would rather buy a form you can disperse yourself, epoxy resin color powder is another option.

Set the Load Rate From Your Print Method

Load rate follows the application rather than a single house figure. Screen printing uses 20–50% pigment by weight, gravure 20–30%, and spray at 10% or below. The binder and film weight help determine where inside those ranges to start.

Run a loading series on your substrate to determine a suitable level for the process. Two systems using the same paste at the same percentage can still read differently, because the film weight and the substrate are doing half the work.

Print work and its load ranges sit with our pigments for printing range. Manufacturing is certified to ISO 9001:2015, and further documentation is provided on request.

The powder range, its size cuts and its applications are set out in the catalog: Aluminum Pigment Powders.

Aluminum pigment powder colour range laid out for colour selection

Fig. 8 — The powder colour range as it is presented for selection.

Questions Buyers Ask Before Ordering

Can it go into a water-based system?
Only the waterborne paste grades. Untreated aluminum gives off hydrogen in water, and the waterborne grades are passivated to limit it. Powder into a water-based binder needs checking for compatibility.

Holographic or standard mirror silver?
Holographic carries a diffraction pattern embossed onto the flake; mirror silver is a plain reflecting face. The pattern can be damaged by excessive shear.

Can powder and paste be swapped?
No. They have different market listings, transport rules and mixing rules. Swapping one for the other changes your qualification, not only your handling.

Request a Sample

Before a sample leaves us, we need the market you sell into, the form you are considering and how you apply it. If the form is paste, the destination port comes with it, because the sample is released only once the dangerous-goods route is confirmed.

Send those four points and we will confirm the grade and the shipping route together — tell us your market, your form, your application and your port, and we will answer with the paste or powder that fits it.

Laissez un message
Si nos produits vous intéressent et que vous souhaitez en savoir plus, veuillez laisser un message ici, nous vous répondrons dans les plus brefs délais.

Produits associés

rainbow violet crystal pigment
Pigment XiallicSparks violet arc-en-ciel KT-T60-22-WR

Le pigment KT-T60-22-WR Rainbow Violet XiallicSparks est notre équivalent direct du Xirallic T60-22, un pigment violet à base d'oxyde d'aluminium (Al₂O₃) formulé sur un substrat de paillettes d'oxyde d'aluminium plutôt que de mica. Avec un indice de réfraction de 1,76 et une granulométrie de 6 à 30 µm, il produit l'éclat cristallin net et facetté caractéristique des peintures automobiles haut de gamme. Contrairement aux pigments à base de mica qui offrent un éclat diffus et doux, ce pigment produit des reflets précis et brillants, d'une saturation et d'une pureté exceptionnelles, pour un effet violet arc-en-ciel.

EN SAVOIR PLUS
xirallic replacement galaxy blue
Pigment bleu galaxie de remplacement Xirallic KT-T60-23-WR

KT-T60-23-WR est notre produit à base d'alumine.remplacement xirallic bleu galaxie Pigment conçu comme une alternative directe au Merck Xirallic T60-23. Construit sur un substrat cristallin Al₂O₃ à indice de réfraction élevé (RI 1,76) avec une gamme de particules de 6 à 30 μm, il offre un éclat bleu facetté et cristallin dans les systèmes de peinture de base automobile — le genre de profondeur et de brillance que les pigments à base de mica ne peuvent structurellement égaler.

EN SAVOIR PLUS
xirallic equivalent rainbow green
Pigment vert arc-en-ciel XiallicSparks KT-T60-25-WR

Le KT-T60-25-WR est un pigment à effet cristallin à base d'alumine (Al₂O₃) de notre gamme XiallicSparks. Il produit un éclat vert arc-en-ciel intense, avec un aspect facetté et une brillance exceptionnelle, caractéristiques des finitions automobiles haut de gamme. Avec une granulométrie de 6 à 30 µm et un indice de réfraction du substrat Al₂O₃ de 1,76 (nettement supérieur à celui du mica standard), ce pigment vert arc-en-ciel à base d'Al₂O₃ offre une saturation et une clarté exceptionnelles dans les systèmes bicouches (base/vernis), à un prix direct usine.

EN SAVOIR PLUS
xirallic equivalent rainbow purple
Pigment XiallicSparks violet arc-en-ciel KT-T60-26-WR

Le KT-T60-26-WR Rainbow Purple est un pigment à effet cristallin à base d'alumine de notre gamme XiallicSparks. Il produit un éclat violet arc-en-ciel intense dans les systèmes de peinture automobile (base-vernis). Formulé à partir d'un substrat de paillettes d'Al₂O₃ (et non de mica), il offre une saturation plus élevée, des reflets plus nets et une meilleure orientation des paillettes que les pigments nacrés classiques. Avec une granulométrie de 6 à 30 µm et un D50 de 9 à 11 µm, il est spécialement conçu pour les applications haut de gamme de première monte et de retouche automobile, où l'éclat violet cristallin est recherché.

EN SAVOIR PLUS
xirallic equivalent pigments
Pigment XiallicSparks en gros pour revêtements automobiles et finitions industrielles

XiallicSparks est la gamme de pigments à effet oxyde d'aluminium de Kolortek, disponible en gros, conçue comme une alternative directe au Merck Xirallic® pour les applications de revêtements automobiles d'origine et industriels haut de gamme. À base de paillettes d'Al₂O₃ plutôt que de mica, cette gamme offre l'éclat facetté et cristallin caractéristique des finitions automobiles haut de gamme, à un prix direct usine généralement 20 à 40 % inférieur aux équivalents Merck pour des performances comparables. Si vous recherchez une alternative au Xirallic en gros, cette gamme de produits est à considérer.

EN SAVOIR PLUS
aluminum oxide pigment
Pigment équivalent Xirallic, approvisionnement direct d'usine

Si vous recherchez unÉquivalent Xirallic directement du fabricant Pour obtenir le même effet scintillant à facettes que celui conféré par Merck Xirallic à ses revêtements, la gamme XiallicSparks de Kolortek (références KT-T60 et KT-F60) offre un substrat cristallin d'oxyde d'aluminium 20 à 40 % moins cher que les produits de marque équivalents. Disponible en onze qualités, allant du Galaxy Silver au Flame Copper, avec des granulométries de 6 à 30 µm et une livraison directe depuis notre usine en Chine, cette gamme constitue une alternative idéale pour les formulateurs de revêtements automobiles recherchant la performance sans le prix exorbitant de Merck.

EN SAVOIR PLUS